Recieved:

08/03/2026

Accepted:

27/07/2026

Page: 

–

doi:

http://dx.doi.org/10.17515/resm2026-1556ma0308rv

Views:

5

The effects of temperature on the durability of concrete incorporating supplementary cementitious materials (SCMs)

Melany Isabel Pinilla-Hernández 1, Tamar Awad Parada 2, Roberto Alonso Gonzalez-Lezcano1

1Architecture and Design Department, Higher Polytechnic School, CEU San Pablo University, Montepríncipe Campus, 28668, Boadilla del Monte, Madrid, Spain
2Department of Architectural Graphic Design, Madrid School of Architecture, Madrid Polytechnic University, 28040 Madrid, Spain

Abstract

The durability of concrete incorporating supplementary cementitious materials (SCMs) is strongly influenced by curing and service temperatures, which affect hydration kinetics, microstructural development, and resistance to deterioration mechanisms. Although numerous studies have investigated individual SCMs, a comprehensive comparison of their temperature-dependent performance remains limited. This systematic literature review evaluates the influence of temperature on the mechanical, durability, microstructural, and sustainability performance of concrete containing fly ash, silica fume, ground granulated blast-furnace slag (GGBFS), and metakaolin. A systematic search was conducted using Scopus, Web of Science, ScienceDirect, and Google Scholar databases, and relevant studies were screened according to predefined inclusion and quality-assessment criteria. The reviewed evidence indicates that silica fume and metakaolin exhibit optimal performance at moderate temperatures (20–40 °C), increasing compressive strength by approximately 20–30% and reducing chloride migration coefficients by up to 60%. Fly ash shows enhanced effectiveness at moderately elevated temperatures (40–60 °C) due to thermal activation of its pozzolanic reactions, while GGBFS demonstrates stable performance across a broader temperature range. Temperatures exceeding 60 °C accelerate hydration but promote pore connectivity, interfacial transition zone degradation, and thermally induced microcracking, resulting in reduced long-term durability. The findings demonstrate that SCM selection should be adapted to expected thermal conditions and highlight the importance of incorporating temperature as a key parameter in durability-oriented mix design. Furthermore, SCM utilization contributes to clinker reduction and lower CO₂ emissions, supporting sustainable and circular-economy-oriented concrete production.

Keywords

Concrete; Durability; Slag; Fly ash; Silica fume; Sustainability

Cite this article as: 

Share This Article
LinkedIn
X
Facebook
journal cover
News & Upcoming Events