Research Article

Improvements of mechanical and physical features of cement mortar by nano AL2O3 and CaCO3 as additives

Abeer M. Humad, Ali J. Dakhil, Samer A. Al-Mashhadi, Zainab Al-Khafaji, Zainab Adel Mohammed, Sarah Fadel Jabr  

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2023.43me0806rs

Research Article

Valorized rice husk as green corrosion inhibitor for Al 6061 in 1M HCl

Peter Ikubanni, Makanjuola Oki, Adeolu Adediran, Sarah Akintola, Adekunle Adeleke, Ikechukwu Anyim, Olanrewaju Adesina, Lawrence Efenovwe

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2023.55ma1021rs

Research Article

Surface plasmon resonance chemical sensor modified with α-naphthylmethacrylate nano thin film for chloroform detection

Yaser Acikbas

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2023.57ma1027rs

Research Article

Parametric study on the effect of temperature on properties of engineered cementitious composites using induction furnace slag as a partial replacement for river sand

S Naveena, Govardhan Bhat

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2023.36ma0824rs

Research Article

Load sharing behaviour in piled-raft foundations over sand and clay: An experimental investigation

Gaurav Pandey, Vishal Kumar Mourya, Dhirendra Patel, Rajesh Kumar, Suresh Kumar

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2023.41me0714rs

Technical Note

Enhancing friction and wear performance in hybrid aluminum composites through grey relational analysis

Dinesh Kumar, Satnam Singh

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.05ma1012tn

Research Article

Results of Sn/Pb solder affected aluminum under wear study

Mohammad Salim Kaiser

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.59ma1029rs

Research Article

Effects of sugarcane bagasse ash as partial replacement of cement in the compressive strength and light transmissibility of Litracon blocks

Katherine E. Buenaflor, Philip Jun S. Celerinos, Chris Julie P. Del Castillo, Jay Marc R. Gala, Katrina A. Sumatra

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.66ma1102rs

Research Article

Impact of superabsorbent polymer on self-compacting concrete's workability, strength, carbonation and freezing-thawing

Venkateswarlu Kuruva, Shirish V. Deo, Meena Murmu

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.10ma1009rs

Review Article

Advancements in base isolation for seismic mitigation: Perspectives on elastomeric and lead rubber bearings

Dhirendra Patel, Vishal Kumar Mourya, Gaurav Pandey, Rajesh Kumar

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.15ma0927rv

Research Article

Spectral analysis of cross-hole sonic logging data for pile integrity assessment

Ilya Lozovsky, Aleksei Churkin

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.82me1115rs

Research Article

RSM based modelling and optimization of Marshall properties of steel-slag and lime-modified asphalt mixtures

Oguntayo Daniel, Ogundipe Olumide, Aluko Oluwasegun, Babatunde Yusuf

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.83ma1117rs

Research Article

Observed failure modes in existing URM buildings after November 26, 2019 earthquake in Albania

Enio Deneko, Hüseyin Bilgin

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.106ea1202rs

Research Article

Effects of seawater and acidic environment on mechanical properties of iron powder-loaded glass-epoxy composite laminates: Experimental and analytical investigation

Youcef Gheid, Abdennacer Chemami, Djamel Gaagaia, Hamza Aouaichia

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.116me1207rs

Research Article

Determination of wear rate and coefficient of friction of Al6262 reinforced with different weight percentage of WC/MoS2 under dry sliding condition

Kadapa Hemadri, Ajith Arul Daniel S, Vijayendra Kukanur, Madeva Nagaral

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.09me1009rs

Research Article

The effect of multi-walled carbon nanotubes on mechanical properties and water adsorption of lightweight foamed concrete

Rami J. Sldozian, Irina V. Burakova, Alexander E. Burakov, Dhafer Z. M. Aljaboobi, Ali Jihad Hamad, Alexey G. Tkachev

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.09me1009rs

Research Article

Axial compressive behavior of recycled aggregate concrete steel composite columns

Daniel Cruze, Chandan Sah, Nijampatnam Manikanta, Dhirendra Kumar Mandal, Abhinash Kumar Jha, A. Arun Solomon

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.04ma1019rs

Research Article

Thin layer interface: An alternative modeling consideration in soil-structure interaction system

Gaurav D. Dhadse, Gangadhar Ramtekkar, Govardhan Bhatt

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.16me0926rs

Research Article

Predicting flexural-creep stiffness in bending beam rheometer (BBR) experiments using advanced super learner machine learning techniques

Alireza Roshan, Magdy Abdelrahman

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.58me1027rs

Research Article

Influence of seawater exposure at the splash zone on the reliability of the rebound hammer test in estimating concrete compressive strength

Philip Jun S. Celerinos, Sarah Jayne C. Frigillana, Joshua Jonielle D. Grande, Norfatima G. H. Ali, Jamie Angel C. Navarro

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.120me1211rs

Review Article

A state of art of review on strengthening of concrete structures using fabric reinforced cementitious matrix

Suyash Surendra Sagare, Kirthiga R, Elavenil S

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.133ma1226rv

Research Article

Impact of treatment temperature of metakaolin on strength and sulfate resistance of concrete

Mutiu Adelodun Akinpelu, Ash-Shu’ara Marafa Salman, Yusuf Ayoola Jimoh, Ibrahim Tunde Yahaya, Hakeem Mayowa Salami

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.06ma1012rs

Review Article

Wind-induced torsional loads and responses of tall buildings

Ashish Singh, Denise-Penelope N. Kontoni, Sasankasekhar Mandal

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.08st1011rv

Research Article

Effect of GGBFS and fly ash proportions on fresh, tensile and cracking features of alkali activated concrete with low NaOH concentrations

Mangalapuri Venkateswarlu, T.D Gunneswara Rao

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.67me1102rs

Research Article

Experimental investigation and numerical optimization of sheet metal forming limits during deep drawing process of DD14 steel

Faouzi Hamza, Ouzine Boussaid, Hamid Hamadache, Abdelmoumene Guedri 

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.118me1209rs

Research Article

Investigation on floor response spectra of a three-story building exposed to near- and far-field earthquakes

Vyshnavi Pesaralanka, Kameswara Rao Burugapalli, Surya Prakash Challagulla

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.115ea1207rs

Research Article

The effect of age and wear on the mechanical performance of HDPE 80 polyethylene pipes

Noureddine Haddad, Ahmed Belbah

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.131me1225rs

Research Article

Seismic response prediction using a hybrid unsupervised and supervised machine learning in case of 3D RC frame buildings

Benbokhari Abdellatif, Benazouz Chikh, Mébarki Ahmed

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.137me1229rs

Research Article

Investigation of the influence of mineral fillers on the structural and mechanical characteristics of polyethylene high-density (PEHD) composites reinforced with alumina and talc

Fatma Zohra Benabid, Said Mohamed El Cheikh Mohamed Salem, Oum Keltoum Mallem, Foued Zouai

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.140me0104rs

Review Article

Environmental control system (ECS) design approach for collective nuclear, biological, and chemical (NBC) protection in military aircraft: A review

Emre Güler

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.176st0207rv

Research Article

Probabilistic investigation of the pounding effect in steel moment resisting frames with equal and unequal heights

Abbasali Sadeghi, Hamid Kazemi, Mohammad Hossein Razmkhah, Amirreza Sadeghi

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.07ma1012rs

Research Article

Flux potentials of local talc in low voltage electro-porcelain insulator production

Ifeanyi Uchegbulam, Agbo Sunday Chukwuemeka, Onyinyechi Pauline Elenwo Emmanuel Owoichoechi Momoh

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.96ma1204rs

Research Article

Experimental study on the effect of colloidal nano silica in self-compacting concrete containing ground granulated blast furnace slag

K. Shyam Sundar Murty, G.V. Rama Rao, S. Adiseshu

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.105me1204rs

Research Article

Experimental study on the utilization of construction and demolition waste of recycled aggregate with GGBS and I-Crete in pavement quality concrete

B. Chitti Babu, K. Durga Rani

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.87me1110rs

Research Article

Investigation of strength and durability performance of concrete with varying crude oil waste ratios

Qosai Sahib Radi Marshdi, Ali Jaafar Dakhil, Zainab Al-Khafaji

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.122me1211rs

Research Article

A novel high order theory for static bending of functionally graded (FG) beams subjected to various mechanical loads

Mourad Chitour, Faicel Khadraoui, Khelifa Mansouri, Billel Rebai, Abderrahmane Menasria, Amina Zemmouri, Sofiane Touati, Haithem Boumediri

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.141me0104rs

Research Article

Dynamic behavior of high damping rubber bearings and lead rubber bearings under near-fault earthquakes

Dhirendra Patel, Rajesh Kumar, Vishal Kumar Mourya, Gaurav Pandey

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.194ea0225rs

Review Article

Harnessing microbes for self-healing concrete – A review

Farzin Asgharpour, Kadir Çakiral, Khaled Hamed Marar

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.207ma0304rv

Research Article

Influence of SiO2 and nano graphene particles on the microstructure and mechanical behavior of A356 alloy metal composites

Samuel Dayanand, S Manjunath Yadav, Madeva Nagaral, Satish Babu Boppana, Manjunatha T H, V Auradi

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.73me1106rs

Research Article

Contribution to the study of an eco-sand concrete containing recycled sands from waste granite and recycled clinker

Nouha Rezaiguia, Houria Hebhoub, Leila Kherraf, Mohammed Ichem Benhalilou

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.129ma1220rs

Research Article

General analysis of the dissipation of strain energy in circular columns

Victor Rizov

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.134me1228rs

Review Article

Factors affecting durability properties of GPC: A review

Nabaz Yassen Ezuldin, Saad Mahmood Raoof, Alyaa Abbas Alattar, Hussein Hamada

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.145ma0109rv

Research Article

Performance analysis of fuzzy-LQR and fuzzy-LQG controllers for active vehicle suspension systems

Emre Kemer, Hasan Başak

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.177ce0207rs

Research Article

Reliability approach for lifetime prediction of the aluminum extrusion dies

Mustapha Hadji, Mohamed Benamira, Rabia Khelif

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.104ma1202rs

Research Article

Internal force transfer in segmental RC structures

Seymur Bashirzade, Okan Ozcan, Izzet Ufuk Cagdas

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.146st0109rs

Research Article

Filament manufacturing via external grooving of an HDPE pipe wall: RSM optimization and mechanical tests validation

Sabrina Mammeri, Khaider Bouacha, Kamel Chaoui, Wafia Ghabeche, Khaoula Berkas

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.150me0714rs

Research Article

Optimizing concrete strength through pozzolan variation, heat treatment, and alkaline solution modulation: A comprehensive study

Andi Yusra, Jasmi Jasmi, Hernanda Mirza Pratama Simatupang, Irwansyah Irwansyah, Lissa Opirina

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.175ma0205rs

Research Article

Development of eco-friendly self-compacting concrete using marble powder, blast furnace slag and glass fibre-reinforced plastic waste: Application of mixture design approach

Manel Djeddou, Mohamed Amieur, Rabah Chaid, Habib-Abdelhak Mesbah

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.178ma0208rs

Research Article

Prototype silicone rubber based passive seismic damper: Development, characterization and implementation

Utsav Koshti, Sharadkumar Purohit

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.201ma0229rs

Research Article

Analyzing the impact of nano-sized silica on composite concrete: A static approach utilizing response surface method

A. Narender Reddy, G. Gautham Kishore Reddy, P. Narashima Reddy, K. Srinivas Reddy, B. Venkata Kavyateja

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.172ma0202rs

Research Article

Thermal conductivity of functional fibrous inhomogeneous materials

Kriven Galina, Ryzhova Elizaveta

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.196cs0227rs

Research Article

Effects of rattan fiber length variation on mechanical properties, characterization, and microstructure of concrete

Andi Yusra, Zakia, Surya Perdana, Fachruddin Fachruddin, Teuku Budi Aulia

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.208me0305rs

Research Article

Comparison of single and multi-coil self-powered MR damper subjected to cyclic and earthquake loading for structural vibration control

Daniel Cruze, Balaji Ramalingam, Nedunchezhian Krishnaraju

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.209st0306rs

Research Article

Evaluation of damping reduction factors for displacement and acceleration spectra using code-compatible near-fault and far-fault ground motions depending on site conditions

Abdelmalek Abdelhamid, Baizid Benahmed, Omar Laghrouche, Mehmet Palanci, Lakhdar Aidaoui

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.153ea0209rs

Review Article

Review on base and inter storey seismic isolation systems for high rise buildings

Gudipati Chaitanya Avinash, N. Lingeshwaran

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.156st0117rv

Research  Article

Study on performance of multiwall carbon nanotubes and functionalized multiwall carbon nanotubes/ poly aryl ether ketone polymer composite gears

Rai Sujit Nath Sahai, Pravin Nana Jadhav, Achyut Sahebrao Raut, Sumit Shahaji Surve

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.217na0324rs

Research  Article

Research on nonlinear corrosion law of epoxy coating on steel bridges based on image processing

Yi Zhang, Tian Su

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.219ma0325rs

Research  Article

Enhancing the seismic performance of a concentrically braced reinforced concrete frame using an I-shaped shear link made of low yield point steel

Sara Hadidi, Denise-Penelope N. Kontoni, Imran Karimi

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.263st0105rs

Research  Article

A study on the quantitative recrystallization of cold deformed copper affected by tin-lead solder

Mohammad Salim Kaiser, S Reaz Ahmed

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.136ma1228rs

Research  Article

Enhancing sustainability and performance in alkali-activated mortars with recycled rubber aggregates subjected to varied curing methods

Abdelhafid Benammar, Ammar Noui, Abdelatif Benouadah,; Nabil Maafi, Oussama Kessal, Meriem Dridi, Ahmed Abderraouf Belkadi

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.192ma0226rs

Research  Article

Improving early strength and durability of eco-friendly mortars: Investigating the influence of limestone filler fineness and blast furnace slag combination

Ammar Noui, Ahmed Abderraouf Belkadi, Leila Zeghichi, Oussama Kessal, Mohammed Sallah Bouglada, Yacine Achour, João Castro Gomes

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.226ma0407rs

Research  Article

Impact of supplementary cementitious materials on life cycle cost of high-strength concrete in coastal environments

Ashok D. Chavan, V. K. Rattan, Y. S. Patil

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.232st0404rs

Research  Article

Investigating the constraint role in J-CTOD relationship for compact tension (CT) specimen

Nagaraj Ekabote

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.251me0419rs

Research  Article

Evaluation of self-compacting concrete for concrete repair applications

Hachemi Benaddi, Billel Rebai, Tidjani Messas, Mohamed Salhi

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.255st0423rs

Research  Article

Influence of the ground motion directionality on the global ductility of 3D RC structures

Marco Breccolotti, Mattia Pucci

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.286st0514rs

Technical Note

Optimal positioning and distribution of magnetorheological damper

Chandan K, Daniel C, Anuroop P, S. Vivekananda Sharma, Arunraj E, Hemalatha G

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.168ma0130tn

Research Article

Study the effects of TiB2 reinforcement on the AA-2014 matrix fabricated by friction stir processing

Jitendra Kumara, Vipin Kumar Sharma, Ajay Partap Singh

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.212ma0309rs

Research Article

Phenomenological failure criteria analysis of a composite bolted joint under multi-axial loading using the finite element method

Manuela Karla Ribeiro Mathias, Bruno Mikio Fujiwara Marques

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.225me0411rs

Research Article

The effects of the quality of recycled aggregates on the mechanical properties of roller compacted concrete

Selma Kaabeche, Mebarek Belaoura, Ramdane Kahlouche

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.249me0418rs

Research Article

Optimization of process parameter of FS-welding of aluminum-lithium alloy (AA8090) by using desirability analysis

Munna Singh Dahiya, Meenu Gupta

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.275ma0511rs

Research Article

Optimization of stir casting parameters for the tensile behavior of nano Al2O3 and ZrO2 reinforced Al-Mg-Si alloy metal composites

Annapoorna K, Shobha R, Bharath V, Rajanna S, Manjunath Vatnalmath, Madeva Nagaral, V Auradi, C G Shivaprasad

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.292ma0518rs

Review Article

Influence of palm oil fuel ash as agricultural waste on the environment and strength of geopolymer concrete

Khamees N Abdulhaleem, Hussein M. Hamada, Ali Majdi, Salim T. Yousif

Abstract               Full Text       DOI: http://dx.doi.org/10.17515/resm2024.306ma0602rv

Last Issue

Return to Archive